Westerbeke 4.5 KW BGC -60Hz Manual del operador descargar pdf (Pagina 34)

DESCRIPTION OF ENGINE CONTROL PANEL

General

The engine-mounted control panel is equipped with an ON switch, a START switch, and a STOP switch. The

panel also has three fuses to protect the circuit. The three switches serve the

following functions:

ON Switch· The ON switch provides power

the START circuit. This switch also bypasses the protec-

tive oil pressure shu1down switch until the engine's oil pressure reaches

psi.

START·

The START switch energizes the starter's solenoid which cranks the engine. This switch will

not operate unless the

ON switch is depressed and held at the same time.

SIQE: The STOP switch is used

stop the generator. This switch must be depressed until the gen-

erator comes

a complete stop.

The engine-mounted control panel

protected

three fuses. The

ignition circuit and the

panel cir-

cuit are protected

individual 8 Amp fuses. The

starter circuit is protected

a single

Amp

fuse.

Westerbeke

Generators

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 94 95

Sin comentarios

Westerbeke 4.5 KW BGC -60Hz Manual del operador Pagina 34