Westerbeke BCD 4.4KW Manual del operador descargar pdf (Pagina 56)

Filling the Oil Sump

Add fresh oil through the oil filler cap on the valve

cover (refer

the photographs on pages 6 and 7

for

the BCD 4.4KW, and pages 8 and 9

for

the BCD 6.0KW

forthe

location

the oil filler cap and lube oil dipstick).

After refilling the oil, run the generator

for

a few mo-

ments while checking the engine's oil pressure. Make

sure there is no leakage around the new oil filter

from the oil drain system, and then stop the generator.

Then check the quantity of oil with the lube oil dipstick.

Fill to, but not over, the high mark on the dipstick,

should the engine require additional oil.

Oil

Filler

Cap

Rocker

Cover

Oil

Dipstick

lower

Crankcase

Westerbeke Generators

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 93 94

Sin comentarios

Westerbeke BCD 4.4KW Manual del operador Pagina 56