Westerbeke WPDS-20 Manual del operador descargar pdf (Pagina 19)

As indicated above, operate the engine in moderation during the 50-hour break-in period. (On one hand

don't

baby the engine, but on the other hand, however, don't abuse it.)

Starting

Under

Normal

Conditions

Follow the procedure below

for

normal starting of the engine:

Check the engine and transmission lubricant levels and fill, if necessary.

Make sure there is sufficient fuel on board. Keep fuel tank(s) as full as possible. Check the fuel filters

and water separators

for

the presence

contaminants and/or water. Drain and clean them

needed.

Check the coolant level in the plastic recovery tank. Add coolant solu1ion as needed.

NOTE: Excessive loss

coolant from the plastic recovery tank indicates a cooling system

leak. Check the entire cooling system and the recovery tank and

connections at the ex-

haust manifold, and pressurize the system to locate the leak. In cases

excessive coolant

loss,

the system must be refilled as outlined under the "PREPARATION FOR STARTING" sec-

tion

this manual, page

22.

Check

for

oil and fuel leaks, particularly if signs

such leaks are found on the bottom

the engine or

below the engine.

When checking your engine's coolant and oil levels, check the engine

for

any noticeable abnormalities

such as loose or missing bolts, loose brackets and mounts, loose hose clamps, chafed wires,

any

other components that exhibit wear

are loose.

Start

the engine in accordance with the "STARTING PROCEDURE" instructions found on page

26,

and allow

the engine's operating temperature

reach 140 - 150' F before operating the engine underway.

Westerbeke

Diesel

Engines

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 113 114

Comentarios a estos manuales

Sin comentarios

Westerbeke WPDS-20 Manual del operador Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Motor Westerbeke WPDS-20