Westerbeke 21A Manual de instalación descargar pdf (Pagina 42)

FINAL INSTALLATION CHECKS

NOTE: Also refer to PREPARATIONS FOR INITIAL START-UP in your Operator’s Manual.

Before starting the engine or generator complete the follow-

ing checklist:

■ Is there fuel in the tanks and are the fuel valves open?

■ Has lube oil been added to the engine?

■ Is there transmission fluid in the transmission?

■ Has the proper coolant mix been added?

■ Are the battery cables properly connected?

■ Is the exhaust system secure and all connections tight?

■ Is the transmission linkage positioned correctly? Is the

gear in Neutral?

■ Is the raw water petcock open? Is the raw water pump

primed?

■ Are the AC and load connection wires securely

connected to the circuit breaker?

With the engine or generator running, check the following:

■ Make certain that water is flowing from the exhaust.

■ Check the instrument gauges for proper readings.

■ Inspect the engine for fuel, water, coolant, and oil

leaks.

■ Listen for unusual sounds and vibrations.

■ Will the engine shift in and out of gear?

■ Can you throttle up to the recommended rpm’s? Is the

throttle action smooth?

■ Apply a load to the generator; check the output fre-

quency.

NOTE: See your operator’s manual for the output

adjustment.

After shutdown, check the engine or generator carefully.

inspect all fluid levels, check hose clamps, fuel lines, etc.

1 2 ... 37 38 39 40 41 42 43 44 45 46

Sin comentarios

Westerbeke 21A Manual de instalación Pagina 42