Westerbeke 38B FOUR Manual del operador descargar pdf (Pagina 37)

STOPPING

PROCEDURE

Remove the AC electrical loaf from the generator and allow the generator

run for 3 to 5 minutes to

stabilize its operating temperature.

Depress the STOP switch and hold it until the generator is completely stopped.

Now release the STOP switch.

Remote Stopping

Procedure

To stop the generator, depress the STOP switch which opens the normally closed B+ path for voltage to

the engine's run circuit. The bright green LED will

dim/faint when the generator slows and stops.

Then it will

out, indicating the engine has stopped. The STOP switch must be held open until the

generator comes

a complete stop. Remote start panels may be connected

the generator set as

indicated. A jumper has to be removed between the T

-1

and T -2 connections

the panel connection

terminal board. (Refer to the wiring diagram in the "ELECTRICAL

SYSTEM" section

this manual for

remote start/stop panel connections.)

WESTERBEKE

GENERATORS

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 85 86

Sin comentarios

Westerbeke 38B FOUR Manual del operador Pagina 37